Mecer 2KVA Line Interactive UPS (ME-2000-VU)

The Mecer 2KVA Line Interactive UPS (ME-2000-VU) is a reliable uninterruptible power supply designed to protect home and office electronics from power outages, voltage fluctuations, and surges. With a capacity of 2000VA / 1200W, it supports desktop computers, routers, and small server setups. Its advanced features, including Automatic Voltage Regulation (AVR), smart communication ports, and cold start functionality, ensure seamless operation and extended battery life for critical devices.

Product Features

Automatic Voltage Regulation (AVR)

Stabilizes incoming voltage by boosting low voltages and reducing high voltages without switching to battery mode, protecting your devices and extending battery lifespan.

Power Protection

Built-in safeguards prevent overloads, overcharging, and excessive discharges, ensuring your electronics remain safe during electrical disturbances.

Cold Start Function

Allows the UPS to power on using its internal batteries even when utility power is unavailable, providing emergency support during outages.

Smart Communication

Equipped with a USB port and optional RS-232 interface, it supports monitoring software on Windows, Linux, and macOS, allowing real-time status updates and management.

Data Line Protection

Built-in RJ-11/RJ-45 ports shield telephone, modem, or Ethernet lines from electrical spikes, preventing data loss or hardware damage.

Microprocessor Control

Advanced microprocessor management ensures higher reliability, precise voltage regulation, and better overall UPS performance compared to analog units.

Product Specifications

• Capacity: 2000VA / 1200W
• Input Voltage Range: 140V – 300V AC (typical)
• Output Waveform: Simulated Sine Wave (Battery Mode)
• Battery Type: 2 x 12V / 9Ah Sealed Lead-Acid
• Backup Time: Approximately 15–20 minutes at 50% load
• Transfer Time: 2–6 ms typical, 10 ms maximum
• Recharge Time: 4–6 hours to 90% capacity
• Dimensions (D x W x H): 397 × 146 × 205 mm
• Net Weight: 11.5 kg – 13.2 kg (varies by region)
• Operating Temperature: 0°C to 40°C
• Humidity: 0% – 90% RH (non-condensing)
• Noise Level: Less than 40dB at 1 meter
• Frequency Range: 50Hz / 60Hz auto-sensing
• Voltage Regulation (Battery Mode): ±10%
• Communication Ports: USB standard, optional RS-232/SNMP
• Audible Alerts: Battery Mode (every 10s), Low Battery (every 1s), Overload (every 0.5s), Battery Replacement (every 2s), Fault (continuous)