Mercury Maverick 1550 Offline 1550VA/930W UPS

The Mercury Maverick 1550 is a high-capacity offline (standby) UPS designed to provide reliable power backup and surge protection for home and small office setups. With a capacity of 1550VA / 930W, it ensures uninterrupted operation for computers, networking equipment, and security systems during power outages. Featuring Automatic Voltage Regulation (AVR), intelligent microprocessor control, and rapid transfer to battery power, this UPS delivers stable, safe power to connected devices. Its multiple output sockets, LED status indicators, and audible alarms make monitoring and management simple and convenient.

Product Features

Automatic Voltage Regulation (AVR)

Includes Boost and Buck technology to stabilize voltage fluctuations (140V–300V range) without using battery power, protecting sensitive electronics.

Multiple Output Sockets

Equipped with 4 universal sockets, allowing connection of multiple devices with different plug types without additional adapters.

Intelligent Battery Management

Super-fast charging recovers batteries to 90% capacity in approximately 6 hours, ensuring readiness for the next power outage.

Comprehensive Protection Suite

Safeguards against short circuits, overloads, deep battery discharge, and electrical surges for extended device and battery life.

Auto-Restart and Cold Start

Automatically powers connected devices once AC utility power returns and can start devices directly from the battery during a total blackout.

Audible and Visual Alerts

LED indicators display Line Mode (green), Battery Mode (yellow flashing), and Fault (red), with distinct alarm patterns for low battery, overload, and fault conditions.

Communication Ports

USB and RS-232 ports allow software-based monitoring and automatic PC shutdown during prolonged outages.

Product Specifications

• Power Capacity: 1550VA / 930W
• Input Voltage: 220–230V AC (Nominal)
• Input Voltage Range: 140–300V AC
• Input Frequency: 50/60Hz (Auto-sensing)
• Output Voltage (Battery Mode): 230V AC ±10%
• Output Waveform: Simulated Sine Wave
• Transfer Time: 2–6ms Typical; 10ms Maximum
• Battery Type: 2x 12V / 8.2Ah Sealed Lead-Acid
• Recharge Time: 6 hours to recover 90% capacity
• Output Sockets: 4x Universal Sockets
• Dimensions (D x W x H): 313 x 129 x 175 mm
• Net Weight: Approx. 9.5 kg
• Noise Level: <40dB
• Protection: Short circuit, overload, battery deep discharge, surge (930 Joules)
• AVR Technology: Boost and Buck AVR for voltage stabilization
• LED Indicators: Green (Line Mode), Yellow (Battery Mode), Red (Fault)
• Audible Alarms: Battery Mode (every 10s), Low Battery (every 1s), Overload (every 0.5s), Fault (continuous)
• Estimated Runtime: Half Load (~465W): 10–20 minutes; Full Load (~930W): 5–10 minutes